[154455.382700] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4010000 action 0xe frozen
[154455.382703] ata1: edma_err_cause=00000010 pp_flags=00000000, dev connect
[154455.382705] ata1: SError: { PHYRdyChg DevExch }
[154455.382712] ata1: hard resetting link
[154461.255963] ata1: link is slow to respond, please be patient (ready=0)
[154465.386773] ata1: SRST failed (errno=-16)
[154465.386779] ata1: hard resetting link
[154466.260539] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154466.282568] ata1.00: ATA-7: WDC WD4000YS-01MPB1, 09.02E09, max UDMA/133
[154466.282573] ata1.00: 781422768 sectors, multi 0: LBA48 
[154466.291564] ata1.00: configured for UDMA/133
[154466.291575] ata1: EH complete
[154466.291684] scsi 1:0:0:0: Direct-Access     ATA      WDC WD4000YS-01M 09.0 PQ: 0 ANSI: 5
[154466.291849] sd 1:0:0:0: [sdd] 781422768 512-byte logical blocks: (400 GB/372 GiB)
[154466.291851] sd 1:0:0:0: Attached scsi generic sg12 type 0
[154466.291954] sd 1:0:0:0: [sdd] Write Protect is off
[154466.291957] sd 1:0:0:0: [sdd] Mode Sense: 00 3a 00 00
[154466.291992] sd 1:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[154466.292264] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154466.310273] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154466.310275] ata1.00: PCI err cause 0x40000100
[154466.310281] ata1.00: failed command: READ DMA
[154466.310286] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154466.310287] ata1.00: status: { DRDY }
[154466.310292] ata1: hard resetting link
[154466.766399] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154466.798425] ata1.00: configured for UDMA/133
[154466.798447] ata1: EH complete
[154466.798475] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154466.816473] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154466.816475] ata1.00: PCI err cause 0x40000100
[154466.816477] ata1.00: failed command: READ DMA
[154466.816481] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154466.816482] ata1.00: status: { DRDY }
[154466.816486] ata1: hard resetting link
[154467.273246] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154467.304263] ata1.00: configured for UDMA/133
[154467.304286] ata1: EH complete
[154467.304323] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154467.322371] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154467.322378] ata1.00: PCI err cause 0x40000100
[154467.322382] ata1.00: failed command: READ DMA
[154467.322386] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154467.322388] ata1.00: status: { DRDY }
[154467.322393] ata1: hard resetting link
[154467.778104] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154467.809118] ata1.00: configured for UDMA/133
[154467.809137] ata1: EH complete
[154467.809173] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154467.827203] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154467.827210] ata1.00: PCI err cause 0x40000100
[154467.827213] ata1.00: failed command: READ DMA
[154467.827218] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154467.827225] ata1.00: status: { DRDY }
[154467.827229] ata1: hard resetting link
[154468.283954] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154468.314972] ata1.00: configured for UDMA/133
[154468.314993] ata1: EH complete
[154468.315020] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154468.333042] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154468.333053] ata1.00: PCI err cause 0x40000100
[154468.333056] ata1.00: failed command: READ DMA
[154468.333060] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154468.333061] ata1.00: status: { DRDY }
[154468.333065] ata1: hard resetting link
[154468.788797] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154468.819819] ata1.00: configured for UDMA/133
[154468.819838] ata1: EH complete
[154468.819873] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154468.837901] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154468.837903] ata1.00: PCI err cause 0x40000100
[154468.837907] ata1.00: failed command: READ DMA
[154468.837914] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154468.837916] ata1.00: status: { DRDY }
[154468.837920] ata1: hard resetting link
[154469.294666] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154469.325674] ata1.00: configured for UDMA/133
[154469.325690] sd 1:0:0:0: [sdd]  
[154469.325692] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[154469.325693] sd 1:0:0:0: [sdd]  
[154469.325695] Sense Key : Aborted Command [current] [descriptor]
[154469.325697] Descriptor sense data with sense descriptors (in hex):
[154469.325698]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
[154469.325703]         0f ff ff ff 
[154469.325705] sd 1:0:0:0: [sdd]  
[154469.325707] Add. Sense: No additional sense information
[154469.325708] sd 1:0:0:0: [sdd] CDB: 
[154469.325709] Read(10): 28 00 00 00 00 00 00 00 08 00
[154469.325714] end_request: I/O error, dev sdd, sector 0
[154469.325717] Buffer I/O error on device sdd, logical block 0
[154469.325737] ata1: EH complete
[154469.325783] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154469.343773] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154469.343776] ata1.00: PCI err cause 0x40000100
[154469.343784] ata1.00: failed command: READ DMA
[154469.343791] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154469.343795] ata1.00: status: { DRDY }
[154469.343802] ata1: hard resetting link
[154469.800509] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154469.831531] ata1.00: configured for UDMA/133
[154469.831552] ata1: EH complete
[154469.831589] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154469.849622] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154469.849629] ata1.00: PCI err cause 0x40000100
[154469.849631] ata1.00: failed command: READ DMA
[154469.849635] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154469.849637] ata1.00: status: { DRDY }
[154469.849642] ata1: hard resetting link
[154470.305369] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154470.336374] ata1.00: configured for UDMA/133
[154470.336394] ata1: EH complete
[154470.336431] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154470.354463] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154470.354470] ata1.00: PCI err cause 0x40000100
[154470.354473] ata1.00: failed command: READ DMA
[154470.354477] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154470.354479] ata1.00: status: { DRDY }
[154470.354483] ata1: hard resetting link
[154470.811204] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154470.842232] ata1.00: configured for UDMA/133
[154470.842250] ata1: EH complete
[154470.842279] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154470.860296] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154470.860305] ata1.00: PCI err cause 0x40000100
[154470.860311] ata1.00: failed command: READ DMA
[154470.860316] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154470.860317] ata1.00: status: { DRDY }
[154470.860321] ata1: hard resetting link
[154471.316073] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154471.347094] ata1.00: configured for UDMA/133
[154471.347112] ata1: EH complete
[154471.347140] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154471.365260] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154471.365272] ata1.00: PCI err cause 0x40000100
[154471.365275] ata1.00: failed command: READ DMA
[154471.365279] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154471.365281] ata1.00: status: { DRDY }
[154471.365285] ata1: hard resetting link
[154471.820934] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154471.851942] ata1.00: configured for UDMA/133
[154471.851963] ata1: EH complete
[154471.852000] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154471.870032] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154471.870036] ata1.00: PCI err cause 0x40000100
[154471.870040] ata1.00: failed command: READ DMA
[154471.870045] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154471.870046] ata1.00: status: { DRDY }
[154471.870051] ata1: hard resetting link
[154472.325774] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154472.356799] ata1.00: configured for UDMA/133
[154472.356816] sd 1:0:0:0: [sdd]  
[154472.356818] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[154472.356820] sd 1:0:0:0: [sdd]  
[154472.356821] Sense Key : Aborted Command [current] [descriptor]
[154472.356823] Descriptor sense data with sense descriptors (in hex):
[154472.356824]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
[154472.356829]         0f ff ff ff 
[154472.356832] sd 1:0:0:0: [sdd]  
[154472.356833] Add. Sense: No additional sense information
[154472.356834] sd 1:0:0:0: [sdd] CDB: 
[154472.356835] Read(10): 28 00 00 00 00 00 00 00 08 00
[154472.356840] end_request: I/O error, dev sdd, sector 0
[154472.356843] Buffer I/O error on device sdd, logical block 0
[154472.356858] ata1: EH complete
[154472.356905] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154472.374925] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154472.374932] ata1.00: PCI err cause 0x40000100
[154472.374938] ata1.00: failed command: READ DMA
[154472.374945] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154472.374947] ata1.00: status: { DRDY }
[154472.374951] ata1: hard resetting link
[154472.830634] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154472.861649] ata1.00: configured for UDMA/133
[154472.861668] ata1: EH complete
[154472.861696] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154472.879735] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154472.879737] ata1.00: PCI err cause 0x40000100
[154472.879745] ata1.00: failed command: READ DMA
[154472.879749] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154472.879750] ata1.00: status: { DRDY }
[154472.879755] ata1: hard resetting link
[154473.337486] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154473.368507] ata1.00: configured for UDMA/133
[154473.368529] ata1: EH complete
[154473.368561] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154473.386561] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154473.386562] ata1.00: PCI err cause 0x40000100
[154473.386565] ata1.00: failed command: READ DMA
[154473.386569] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154473.386570] ata1.00: status: { DRDY }
[154473.386574] ata1: hard resetting link
[154473.843338] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154473.874356] ata1.00: configured for UDMA/133
[154473.874377] ata1: EH complete
[154473.874406] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154473.892449] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154473.892453] ata1.00: PCI err cause 0x40000100
[154473.892456] ata1.00: failed command: READ DMA
[154473.892460] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154473.892461] ata1.00: status: { DRDY }
[154473.892466] ata1: hard resetting link
[154474.348195] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154474.379214] ata1.00: configured for UDMA/133
[154474.379234] ata1: EH complete
[154474.379261] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154474.397269] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154474.397270] ata1.00: PCI err cause 0x40000100
[154474.397273] ata1.00: failed command: READ DMA
[154474.397277] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154474.397279] ata1.00: status: { DRDY }
[154474.397283] ata1: hard resetting link
[154474.853044] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154474.884067] ata1.00: configured for UDMA/133
[154474.884085] ata1: EH complete
[154474.884113] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154474.902101] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154474.902109] ata1.00: PCI err cause 0x40000100
[154474.902113] ata1.00: failed command: READ DMA
[154474.902122] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154474.902123] ata1.00: status: { DRDY }
[154474.902127] ata1: hard resetting link
[154475.358906] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154475.391917] ata1.00: configured for UDMA/133
[154475.391934] sd 1:0:0:0: [sdd]  
[154475.391935] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[154475.391937] sd 1:0:0:0: [sdd]  
[154475.391938] Sense Key : Aborted Command [current] [descriptor]
[154475.391940] Descriptor sense data with sense descriptors (in hex):
[154475.391941]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
[154475.391946]         0f ff ff ff 
[154475.391948] sd 1:0:0:0: [sdd]  
[154475.391950] Add. Sense: No additional sense information
[154475.391951] sd 1:0:0:0: [sdd] CDB: 
[154475.391952] Read(10): 28 00 00 00 00 00 00 00 08 00
[154475.391957] end_request: I/O error, dev sdd, sector 0
[154475.391960] Buffer I/O error on device sdd, logical block 0
[154475.391980] ata1: EH complete
[154475.391982]  sdd: unable to read partition table
[154475.392086] sdd: detected capacity change from 0 to 400088457216
[154475.392296] sdd: detected capacity change from 0 to 400088457216
[154475.392301] sd 1:0:0:0: [sdd] Attached SCSI disk
[154475.419700] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154475.437699] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154475.437701] ata1.00: PCI err cause 0x40000100
[154475.437711] ata1.00: failed command: READ DMA EXT
[154475.437715] ata1.00: cmd 25/00:08:00:90:93/00:00:2e:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154475.437716] ata1.00: status: { DRDY }
[154475.437722] ata1: hard resetting link
[154475.893744] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154475.924763] ata1.00: configured for UDMA/133
[154475.924784] ata1: EH complete
[154475.924822] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154475.942859] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154475.942865] ata1.00: PCI err cause 0x40000100
[154475.942869] ata1.00: failed command: READ DMA EXT
[154475.942873] ata1.00: cmd 25/00:08:00:90:93/00:00:2e:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154475.942874] ata1.00: status: { DRDY }
[154475.942880] ata1: hard resetting link
[154476.400596] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154476.431621] ata1.00: configured for UDMA/133
[154476.431640] ata1: EH complete
[154476.431675] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154476.449670] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154476.449677] ata1.00: PCI err cause 0x40000100
[154476.449681] ata1.00: failed command: READ DMA EXT
[154476.449685] ata1.00: cmd 25/00:08:00:90:93/00:00:2e:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154476.449687] ata1.00: status: { DRDY }
[154476.449691] ata1: hard resetting link
[154476.906444] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154476.937456] ata1.00: configured for UDMA/133
[154476.937472] ata1: EH complete
[154476.937498] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154476.955533] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154476.955540] ata1.00: PCI err cause 0x40000100
[154476.955545] ata1.00: failed command: READ DMA EXT
[154476.955549] ata1.00: cmd 25/00:08:00:90:93/00:00:2e:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154476.955554] ata1.00: status: { DRDY }
[154476.955560] ata1: hard resetting link
[154477.411303] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154477.442317] ata1.00: configured for UDMA/133
[154477.442339] ata1: EH complete
[154477.442368] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154477.460405] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154477.460408] ata1.00: PCI err cause 0x40000100
[154477.460414] ata1.00: failed command: READ DMA EXT
[154477.460418] ata1.00: cmd 25/00:08:00:90:93/00:00:2e:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154477.460419] ata1.00: status: { DRDY }
[154477.460424] ata1: hard resetting link
[154477.916157] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154477.947185] ata1.00: configured for UDMA/133
[154477.947211] ata1: EH complete
[154477.947240] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154477.965290] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154477.965292] ata1.00: PCI err cause 0x40000100
[154477.965295] ata1.00: failed command: READ DMA EXT
[154477.965299] ata1.00: cmd 25/00:08:00:90:93/00:00:2e:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154477.965301] ata1.00: status: { DRDY }
[154477.965305] ata1: hard resetting link
[154478.421012] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154478.453030] ata1.00: configured for UDMA/133
[154478.453047] sd 1:0:0:0: [sdd]  
[154478.453048] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[154478.453050] sd 1:0:0:0: [sdd]  
[154478.453051] Sense Key : Aborted Command [current] [descriptor]
[154478.453054] Descriptor sense data with sense descriptors (in hex):
[154478.453055]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 ff ff 
[154478.453061]         ff ff ff ff 
[154478.453063] sd 1:0:0:0: [sdd]  
[154478.453064] Add. Sense: No additional sense information
[154478.453066] sd 1:0:0:0: [sdd] CDB: 
[154478.453067] Read(10): 28 00 2e 93 90 00 00 00 08 00
[154478.453073] end_request: I/O error, dev sdd, sector 781422592
[154478.453076] Buffer I/O error on device sdd, logical block 97677824
[154478.453109] ata1: EH complete
[154478.453156] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154478.471198] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154478.471200] ata1.00: PCI err cause 0x40000100
[154478.471203] ata1.00: failed command: READ DMA EXT
[154478.471207] ata1.00: cmd 25/00:08:00:90:93/00:00:2e:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154478.471209] ata1.00: status: { DRDY }
[154478.471213] ata1: hard resetting link
[154478.928860] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154478.959880] ata1.00: configured for UDMA/133
[154478.959903] ata1: EH complete
[154478.959930] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154478.977922] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154478.977923] ata1.00: PCI err cause 0x40000100
[154478.977927] ata1.00: failed command: READ DMA EXT
[154478.977931] ata1.00: cmd 25/00:08:00:90:93/00:00:2e:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154478.977933] ata1.00: status: { DRDY }
[154478.977936] ata1: hard resetting link
[154479.434714] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154479.465738] ata1.00: configured for UDMA/133
[154479.465761] ata1: EH complete
[154479.465791] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154479.483841] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154479.483844] ata1.00: PCI err cause 0x40000100
[154479.483849] ata1.00: failed command: READ DMA EXT
[154479.483853] ata1.00: cmd 25/00:08:00:90:93/00:00:2e:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154479.483855] ata1.00: status: { DRDY }
[154479.483859] ata1: hard resetting link
[154479.939576] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154479.970589] ata1.00: configured for UDMA/133
[154479.970613] ata1: EH complete
[154479.970649] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154479.988685] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154479.988687] ata1.00: PCI err cause 0x40000100
[154479.988691] ata1.00: failed command: READ DMA EXT
[154479.988699] ata1.00: cmd 25/00:08:00:90:93/00:00:2e:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154479.988701] ata1.00: status: { DRDY }
[154479.988705] ata1: hard resetting link
[154480.446428] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154480.477444] ata1.00: configured for UDMA/133
[154480.477466] ata1: EH complete
[154480.477503] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154480.495550] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154480.495555] ata1.00: PCI err cause 0x40000100
[154480.495558] ata1.00: failed command: READ DMA EXT
[154480.495562] ata1.00: cmd 25/00:08:00:90:93/00:00:2e:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154480.495563] ata1.00: status: { DRDY }
[154480.495567] ata1: hard resetting link
[154480.951272] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154480.982285] ata1.00: configured for UDMA/133
[154480.982305] ata1: EH complete
[154480.982332] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154481.000340] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154481.000342] ata1.00: PCI err cause 0x40000100
[154481.000344] ata1.00: failed command: READ DMA EXT
[154481.000349] ata1.00: cmd 25/00:08:00:90:93/00:00:2e:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154481.000351] ata1.00: status: { DRDY }
[154481.000356] ata1: hard resetting link
[154481.458131] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154481.489148] ata1.00: configured for UDMA/133
[154481.489164] sd 1:0:0:0: [sdd]  
[154481.489165] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[154481.489167] sd 1:0:0:0: [sdd]  
[154481.489168] Sense Key : Aborted Command [current] [descriptor]
[154481.489171] Descriptor sense data with sense descriptors (in hex):
[154481.489171]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 ff ff 
[154481.489177]         ff ff ff ff 
[154481.489179] sd 1:0:0:0: [sdd]  
[154481.489180] Add. Sense: No additional sense information
[154481.489182] sd 1:0:0:0: [sdd] CDB: 
[154481.489182] Read(10): 28 00 2e 93 90 00 00 00 08 00
[154481.489188] end_request: I/O error, dev sdd, sector 781422592
[154481.489190] Buffer I/O error on device sdd, logical block 97677824
[154481.489211] ata1: EH complete
[154481.489276] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154481.507267] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154481.507271] ata1.00: PCI err cause 0x40000100
[154481.507277] ata1.00: failed command: READ DMA EXT
[154481.507282] ata1.00: cmd 25/00:08:a0:90:93/00:00:2e:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154481.507283] ata1.00: status: { DRDY }
[154481.507287] ata1: hard resetting link
[154481.963990] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154481.995013] ata1.00: configured for UDMA/133
[154481.995035] ata1: EH complete
[154481.995072] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154482.013120] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154482.013123] ata1.00: PCI err cause 0x40000100
[154482.013126] ata1.00: failed command: READ DMA EXT
[154482.013131] ata1.00: cmd 25/00:08:a0:90:93/00:00:2e:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154482.013135] ata1.00: status: { DRDY }
[154482.013142] ata1: hard resetting link
[154482.469831] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154482.500857] ata1.00: configured for UDMA/133
[154482.500879] ata1: EH complete
[154482.500906] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154482.518904] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154482.518905] ata1.00: PCI err cause 0x40000100
[154482.518908] ata1.00: failed command: READ DMA EXT
[154482.518911] ata1.00: cmd 25/00:08:a0:90:93/00:00:2e:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154482.518913] ata1.00: status: { DRDY }
[154482.518918] ata1: hard resetting link
[154482.975685] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154483.006711] ata1.00: configured for UDMA/133
[154483.006733] ata1: EH complete
[154483.006769] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154483.024809] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154483.024812] ata1.00: PCI err cause 0x40000100
[154483.024817] ata1.00: failed command: READ DMA EXT
[154483.024821] ata1.00: cmd 25/00:08:a0:90:93/00:00:2e:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154483.024823] ata1.00: status: { DRDY }
[154483.024827] ata1: hard resetting link
[154483.480547] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154483.511572] ata1.00: configured for UDMA/133
[154483.511598] ata1: EH complete
[154483.511626] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154483.529661] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154483.529663] ata1.00: PCI err cause 0x40000100
[154483.529667] ata1.00: failed command: READ DMA EXT
[154483.529673] ata1.00: cmd 25/00:08:a0:90:93/00:00:2e:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154483.529676] ata1.00: status: { DRDY }
[154483.529680] ata1: hard resetting link
[154483.986393] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154484.017415] ata1.00: configured for UDMA/133
[154484.017440] ata1: EH complete
[154484.017471] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154484.035515] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154484.035518] ata1.00: PCI err cause 0x40000100
[154484.035521] ata1.00: failed command: READ DMA EXT
[154484.035526] ata1.00: cmd 25/00:08:a0:90:93/00:00:2e:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154484.035530] ata1.00: status: { DRDY }
[154484.035534] ata1: hard resetting link
[154484.491257] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154484.522269] ata1.00: configured for UDMA/133
[154484.522285] sd 1:0:0:0: [sdd]  
[154484.522287] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[154484.522288] sd 1:0:0:0: [sdd]  
[154484.522290] Sense Key : Aborted Command [current] [descriptor]
[154484.522292] Descriptor sense data with sense descriptors (in hex):
[154484.522293]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 ff ff 
[154484.522298]         ff ff ff ff 
[154484.522300] sd 1:0:0:0: [sdd]  
[154484.522301] Add. Sense: No additional sense information
[154484.522303] sd 1:0:0:0: [sdd] CDB: 
[154484.522303] Read(10): 28 00 2e 93 90 a0 00 00 08 00
[154484.522309] end_request: I/O error, dev sdd, sector 781422752
[154484.522311] Buffer I/O error on device sdd, logical block 97677844
[154484.522355] ata1: EH complete
[154484.522402] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154484.540407] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154484.540415] ata1.00: PCI err cause 0x40000100
[154484.540420] ata1.00: failed command: READ DMA EXT
[154484.540427] ata1.00: cmd 25/00:08:a0:90:93/00:00:2e:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154484.540429] ata1.00: status: { DRDY }
[154484.540434] ata1: hard resetting link
[154484.996108] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154485.032126] ata1.00: configured for UDMA/133
[154485.032150] ata1: EH complete
[154485.032187] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154485.050237] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154485.050240] ata1.00: PCI err cause 0x40000100
[154485.050245] ata1.00: failed command: READ DMA EXT
[154485.050250] ata1.00: cmd 25/00:08:a0:90:93/00:00:2e:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154485.050252] ata1.00: status: { DRDY }
[154485.050257] ata1: hard resetting link
[154485.507962] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154485.539972] ata1.00: configured for UDMA/133
[154485.539991] ata1: EH complete
[154485.540018] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154485.558012] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154485.558014] ata1.00: PCI err cause 0x40000100
[154485.558019] ata1.00: failed command: READ DMA EXT
[154485.558023] ata1.00: cmd 25/00:08:a0:90:93/00:00:2e:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154485.558024] ata1.00: status: { DRDY }
[154485.558028] ata1: hard resetting link
[154486.013803] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154486.044824] ata1.00: configured for UDMA/133
[154486.044840] ata1: EH complete
[154486.044878] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154486.062922] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154486.062928] ata1.00: PCI err cause 0x40000100
[154486.062932] ata1.00: failed command: READ DMA EXT
[154486.062936] ata1.00: cmd 25/00:08:a0:90:93/00:00:2e:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154486.062938] ata1.00: status: { DRDY }
[154486.062943] ata1: hard resetting link
[154486.519672] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154486.550696] ata1.00: configured for UDMA/133
[154486.550721] ata1: EH complete
[154486.550751] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154486.568795] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154486.568798] ata1.00: PCI err cause 0x40000100
[154486.568806] ata1.00: failed command: READ DMA EXT
[154486.568810] ata1.00: cmd 25/00:08:a0:90:93/00:00:2e:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154486.568812] ata1.00: status: { DRDY }
[154486.568817] ata1: hard resetting link
[154487.024511] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154487.056521] ata1.00: configured for UDMA/133
[154487.056547] ata1: EH complete
[154487.056577] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154487.074620] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154487.074622] ata1.00: PCI err cause 0x40000100
[154487.074625] ata1.00: failed command: READ DMA EXT
[154487.074632] ata1.00: cmd 25/00:08:a0:90:93/00:00:2e:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154487.074636] ata1.00: status: { DRDY }
[154487.074640] ata1: hard resetting link
[154487.530382] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154487.563386] ata1.00: configured for UDMA/133
[154487.563405] sd 1:0:0:0: [sdd]  
[154487.563406] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[154487.563408] sd 1:0:0:0: [sdd]  
[154487.563409] Sense Key : Aborted Command [current] [descriptor]
[154487.563412] Descriptor sense data with sense descriptors (in hex):
[154487.563412]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 ff ff 
[154487.563417]         ff ff ff ff 
[154487.563420] sd 1:0:0:0: [sdd]  
[154487.563421] Add. Sense: No additional sense information
[154487.563422] sd 1:0:0:0: [sdd] CDB: 
[154487.563423] Read(10): 28 00 2e 93 90 a0 00 00 08 00
[154487.563429] end_request: I/O error, dev sdd, sector 781422752
[154487.563431] Buffer I/O error on device sdd, logical block 97677844
[154487.563456] ata1: EH complete
[154487.563531] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154487.581592] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154487.581594] ata1.00: PCI err cause 0x40000100
[154487.581596] ata1.00: failed command: READ DMA
[154487.581601] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154487.581603] ata1.00: status: { DRDY }
[154487.581607] ata1: hard resetting link
[154488.039224] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154488.070243] ata1.00: configured for UDMA/133
[154488.070269] ata1: EH complete
[154488.070308] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154488.088350] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154488.088355] ata1.00: PCI err cause 0x40000100
[154488.088359] ata1.00: failed command: READ DMA
[154488.088363] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154488.088365] ata1.00: status: { DRDY }
[154488.088370] ata1: hard resetting link
[154488.544080] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154488.575553] ata1.00: configured for UDMA/133
[154488.575577] ata1: EH complete
[154488.575615] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154488.593657] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154488.593664] ata1.00: PCI err cause 0x40000100
[154488.593668] ata1.00: failed command: READ DMA
[154488.593673] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154488.593674] ata1.00: status: { DRDY }
[154488.593679] ata1: hard resetting link
[154489.050927] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154489.084939] ata1.00: configured for UDMA/133
[154489.084964] ata1: EH complete
[154489.085003] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154489.103034] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154489.103037] ata1.00: PCI err cause 0x40000100
[154489.103040] ata1.00: failed command: READ DMA
[154489.103047] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154489.103049] ata1.00: status: { DRDY }
[154489.103053] ata1: hard resetting link
[154489.560779] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154489.591793] ata1.00: configured for UDMA/133
[154489.591815] ata1: EH complete
[154489.591842] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154489.609856] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154489.609858] ata1.00: PCI err cause 0x40000100
[154489.609860] ata1.00: failed command: READ DMA
[154489.609864] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154489.609866] ata1.00: status: { DRDY }
[154489.609869] ata1: hard resetting link
[154490.065631] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154490.096646] ata1.00: configured for UDMA/133
[154490.096669] ata1: EH complete
[154490.096696] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154490.114693] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154490.114695] ata1.00: PCI err cause 0x40000100
[154490.114698] ata1.00: failed command: READ DMA
[154490.114702] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154490.114703] ata1.00: status: { DRDY }
[154490.114707] ata1: hard resetting link
[154490.571494] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154490.602499] ata1.00: configured for UDMA/133
[154490.602517] sd 1:0:0:0: [sdd]  
[154490.602518] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[154490.602520] sd 1:0:0:0: [sdd]  
[154490.602521] Sense Key : Aborted Command [current] [descriptor]
[154490.602523] Descriptor sense data with sense descriptors (in hex):
[154490.602524]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
[154490.602529]         0f ff ff ff 
[154490.602532] sd 1:0:0:0: [sdd]  
[154490.602533] Add. Sense: No additional sense information
[154490.602534] sd 1:0:0:0: [sdd] CDB: 
[154490.602535] Read(10): 28 00 00 00 00 00 00 00 08 00
[154490.602540] end_request: I/O error, dev sdd, sector 0
[154490.602543] Buffer I/O error on device sdd, logical block 0
[154490.602588] ata1: EH complete
[154490.602644] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154490.620638] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154490.620649] ata1.00: PCI err cause 0x40000100
[154490.620654] ata1.00: failed command: READ DMA
[154490.620661] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154490.620663] ata1.00: status: { DRDY }
[154490.620667] ata1: hard resetting link
[154491.076340] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154491.107362] ata1.00: configured for UDMA/133
[154491.107386] ata1: EH complete
[154491.107417] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154491.125460] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154491.125464] ata1.00: PCI err cause 0x40000100
[154491.125467] ata1.00: failed command: READ DMA
[154491.125472] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154491.125473] ata1.00: status: { DRDY }
[154491.125477] ata1: hard resetting link
[154491.582206] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154491.613216] ata1.00: configured for UDMA/133
[154491.613239] ata1: EH complete
[154491.613269] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154491.631308] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154491.631311] ata1.00: PCI err cause 0x40000100
[154491.631314] ata1.00: failed command: READ DMA
[154491.631328] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154491.631329] ata1.00: status: { DRDY }
[154491.631334] ata1: hard resetting link
[154492.088047] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154492.119077] ata1.00: configured for UDMA/133
[154492.119103] ata1: EH complete
[154492.119130] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154492.137136] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154492.137138] ata1.00: PCI err cause 0x40000100
[154492.137141] ata1.00: failed command: READ DMA
[154492.137145] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154492.137146] ata1.00: status: { DRDY }
[154492.137150] ata1: hard resetting link
[154492.592906] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154492.623926] ata1.00: configured for UDMA/133
[154492.623951] ata1: EH complete
[154492.623984] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154492.642027] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154492.642029] ata1.00: PCI err cause 0x40000100
[154492.642038] ata1.00: failed command: READ DMA
[154492.642043] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154492.642044] ata1.00: status: { DRDY }
[154492.642049] ata1: hard resetting link
[154493.097760] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154493.128777] ata1.00: configured for UDMA/133
[154493.128802] ata1: EH complete
[154493.128833] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154493.146888] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154493.146891] ata1.00: PCI err cause 0x40000100
[154493.146899] ata1.00: failed command: READ DMA
[154493.146903] ata1.00: cmd c8/00:08:00:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154493.146904] ata1.00: status: { DRDY }
[154493.146910] ata1: hard resetting link
[154493.604611] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154493.636622] ata1.00: configured for UDMA/133
[154493.636640] sd 1:0:0:0: [sdd]  
[154493.636642] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[154493.636643] sd 1:0:0:0: [sdd]  
[154493.636644] Sense Key : Aborted Command [current] [descriptor]
[154493.636647] Descriptor sense data with sense descriptors (in hex):
[154493.636648]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
[154493.636652]         0f ff ff ff 
[154493.636655] sd 1:0:0:0: [sdd]  
[154493.636656] Add. Sense: No additional sense information
[154493.636658] sd 1:0:0:0: [sdd] CDB: 
[154493.636659] Read(10): 28 00 00 00 00 00 00 00 08 00
[154493.636664] end_request: I/O error, dev sdd, sector 0
[154493.636666] Buffer I/O error on device sdd, logical block 0
[154493.636686] ata1: EH complete
[154493.636753] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154493.654742] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154493.654751] ata1.00: PCI err cause 0x40000100
[154493.654758] ata1.00: failed command: READ DMA
[154493.654763] ata1.00: cmd c8/00:08:08:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154493.654764] ata1.00: status: { DRDY }
[154493.654769] ata1: hard resetting link
[154494.110473] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154494.141481] ata1.00: configured for UDMA/133
[154494.141506] ata1: EH complete
[154494.141538] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154494.159538] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154494.159546] ata1.00: PCI err cause 0x40000100
[154494.159550] ata1.00: failed command: READ DMA
[154494.159554] ata1.00: cmd c8/00:08:08:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154494.159555] ata1.00: status: { DRDY }
[154494.159560] ata1: hard resetting link
[154494.615314] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154494.646332] ata1.00: configured for UDMA/133
[154494.646359] ata1: EH complete
[154494.646398] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154494.664437] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154494.664442] ata1.00: PCI err cause 0x40000100
[154494.664446] ata1.00: failed command: READ DMA
[154494.664451] ata1.00: cmd c8/00:08:08:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154494.664452] ata1.00: status: { DRDY }
[154494.664456] ata1: hard resetting link
[154495.120179] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154495.151194] ata1.00: configured for UDMA/133
[154495.151220] ata1: EH complete
[154495.151249] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154495.169704] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154495.169706] ata1.00: PCI err cause 0x40000100
[154495.169709] ata1.00: failed command: READ DMA
[154495.169713] ata1.00: cmd c8/00:08:08:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154495.169714] ata1.00: status: { DRDY }
[154495.169718] ata1: hard resetting link
[154495.626019] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154495.658034] ata1.00: configured for UDMA/133
[154495.658056] ata1: EH complete
[154495.658084] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154495.676130] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154495.676138] ata1.00: PCI err cause 0x40000100
[154495.676142] ata1.00: failed command: READ DMA
[154495.676150] ata1.00: cmd c8/00:08:08:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154495.676152] ata1.00: status: { DRDY }
[154495.676156] ata1: hard resetting link
[154496.132881] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154496.163895] ata1.00: configured for UDMA/133
[154496.163920] ata1: EH complete
[154496.163958] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154496.181986] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154496.181989] ata1.00: cmd c8/00:08:08:00:00/00:00:00:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154496.182000] ata1.00: status: { DRDY }
[154496.182004] ata1: hard resetting link
[154496.637724] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154496.668744] ata1.00: configured for UDMA/133
[154496.668759] sd 1:0:0:0: [sdd]  
[154496.668761] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[154496.668762] sd 1:0:0:0: [sdd]  
[154496.668764] Sense Key : Aborted Command [current] [descriptor]
[154496.668766] Descriptor sense data with sense descriptors (in hex):
[154496.668767]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 00 00 
[154496.668773]         0f ff ff ff 
[154496.668775] sd 1:0:0:0: [sdd]  
[154496.668776] Add. Sense: No additional sense information
[154496.668778] sd 1:0:0:0: [sdd] CDB: 
[154496.668779] Read(10): 28 00 00 00 00 08 00 00 08 00
[154496.668784] end_request: I/O error, dev sdd, sector 8
[154496.668787] Buffer I/O error on device sdd, logical block 1
[154496.668816] ata1: EH complete
[154496.668883] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154496.686923] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154496.686925] ata1.00: PCI err cause 0x40000100
[154496.686928] ata1.00: failed command: READ DMA EXT
[154496.686934] ata1.00: cmd 25/00:08:a8:90:93/00:00:2e:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154496.686938] ata1.00: status: { DRDY }
[154496.686945] ata1: hard resetting link
[154497.144571] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154497.176597] ata1.00: configured for UDMA/133
[154497.176621] ata1: EH complete
[154497.176658] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154497.194693] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154497.194696] ata1.00: PCI err cause 0x40000100
[154497.194700] ata1.00: failed command: READ DMA EXT
[154497.194707] ata1.00: cmd 25/00:08:a8:90:93/00:00:2e:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154497.194709] ata1.00: status: { DRDY }
[154497.194713] ata1: hard resetting link
[154497.650431] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154497.681444] ata1.00: configured for UDMA/133
[154497.681460] ata1: EH complete
[154497.681491] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154497.699517] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154497.699519] ata1.00: PCI err cause 0x40000100
[154497.699522] ata1.00: failed command: READ DMA EXT
[154497.699526] ata1.00: cmd 25/00:08:a8:90:93/00:00:2e:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154497.699529] ata1.00: status: { DRDY }
[154497.699533] ata1: hard resetting link
[154498.155292] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154498.187300] ata1.00: configured for UDMA/133
[154498.187322] ata1: EH complete
[154498.187361] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154498.205397] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154498.205402] ata1.00: PCI err cause 0x40000100
[154498.205405] ata1.00: failed command: READ DMA EXT
[154498.205409] ata1.00: cmd 25/00:08:a8:90:93/00:00:2e:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154498.205410] ata1.00: status: { DRDY }
[154498.205415] ata1: hard resetting link
[154498.661145] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154498.692160] ata1.00: configured for UDMA/133
[154498.692183] ata1: EH complete
[154498.692214] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154498.710244] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154498.710248] ata1.00: PCI err cause 0x40000100
[154498.710252] ata1.00: failed command: READ DMA EXT
[154498.710257] ata1.00: cmd 25/00:08:a8:90:93/00:00:2e:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154498.710258] ata1.00: status: { DRDY }
[154498.710263] ata1: hard resetting link
[154499.167007] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154499.197991] ata1.00: configured for UDMA/133
[154499.198006] ata1: EH complete
[154499.198036] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154499.216055] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154499.216056] ata1.00: PCI err cause 0x40000100
[154499.216059] ata1.00: failed command: READ DMA EXT
[154499.216063] ata1.00: cmd 25/00:08:a8:90:93/00:00:2e:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154499.216064] ata1.00: status: { DRDY }
[154499.216068] ata1: hard resetting link
[154499.672836] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154499.703878] ata1.00: configured for UDMA/133
[154499.703897] sd 1:0:0:0: [sdd]  
[154499.703898] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[154499.703900] sd 1:0:0:0: [sdd]  
[154499.703901] Sense Key : Aborted Command [current] [descriptor]
[154499.703904] Descriptor sense data with sense descriptors (in hex):
[154499.703905]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 ff ff 
[154499.703910]         ff ff ff ff 
[154499.703912] sd 1:0:0:0: [sdd]  
[154499.703914] Add. Sense: No additional sense information
[154499.703915] sd 1:0:0:0: [sdd] CDB: 
[154499.703916] Read(10): 28 00 2e 93 90 a8 00 00 08 00
[154499.703922] end_request: I/O error, dev sdd, sector 781422760
[154499.703925] Buffer I/O error on device sdd, logical block 97677845
[154499.703945] ata1: EH complete
[154499.704002] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154499.722054] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154499.722066] ata1.00: PCI err cause 0x40000100
[154499.722072] ata1.00: failed command: READ DMA EXT
[154499.722079] ata1.00: cmd 25/00:08:a8:90:93/00:00:2e:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154499.722080] ata1.00: status: { DRDY }
[154499.722085] ata1: hard resetting link
[154500.180706] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154500.212715] ata1.00: configured for UDMA/133
[154500.212738] ata1: EH complete
[154500.212766] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154500.230769] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154500.230770] ata1.00: PCI err cause 0x40000100
[154500.230773] ata1.00: failed command: READ DMA EXT
[154500.230777] ata1.00: cmd 25/00:08:a8:90:93/00:00:2e:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154500.230779] ata1.00: status: { DRDY }
[154500.230782] ata1: hard resetting link
[154500.686555] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154500.717570] ata1.00: configured for UDMA/133
[154500.717595] ata1: EH complete
[154500.717624] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154500.735903] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154500.735905] ata1.00: PCI err cause 0x40000100
[154500.735908] ata1.00: failed command: READ DMA EXT
[154500.735912] ata1.00: cmd 25/00:08:a8:90:93/00:00:2e:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154500.735914] ata1.00: status: { DRDY }
[154500.735917] ata1: hard resetting link
[154501.192405] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154501.224424] ata1.00: configured for UDMA/133
[154501.224447] ata1: EH complete
[154501.224484] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154501.242535] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154501.242537] ata1.00: PCI err cause 0x40000100
[154501.242540] ata1.00: failed command: READ DMA EXT
[154501.242544] ata1.00: cmd 25/00:08:a8:90:93/00:00:2e:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154501.242546] ata1.00: status: { DRDY }
[154501.242550] ata1: hard resetting link
[154501.698259] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154501.729266] ata1.00: configured for UDMA/133
[154501.729292] ata1: EH complete
[154501.729332] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154501.747380] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154501.747387] ata1.00: PCI err cause 0x40000100
[154501.747390] ata1.00: failed command: READ DMA EXT
[154501.747395] ata1.00: cmd 25/00:08:a8:90:93/00:00:2e:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154501.747396] ata1.00: status: { DRDY }
[154501.747401] ata1: hard resetting link
[154502.205116] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154502.236131] ata1.00: configured for UDMA/133
[154502.236156] ata1: EH complete
[154502.236183] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154502.254254] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154502.254255] ata1.00: PCI err cause 0x40000100
[154502.254258] ata1.00: failed command: READ DMA EXT
[154502.254262] ata1.00: cmd 25/00:08:a8:90:93/00:00:2e:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154502.254263] ata1.00: status: { DRDY }
[154502.254267] ata1: hard resetting link
[154502.709966] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154502.741986] ata1.00: configured for UDMA/133
[154502.742003] sd 1:0:0:0: [sdd]  
[154502.742005] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[154502.742006] sd 1:0:0:0: [sdd]  
[154502.742008] Sense Key : Aborted Command [current] [descriptor]
[154502.742010] Descriptor sense data with sense descriptors (in hex):
[154502.742011]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 ff ff 
[154502.742016]         ff ff ff ff 
[154502.742018] sd 1:0:0:0: [sdd]  
[154502.742019] Add. Sense: No additional sense information
[154502.742021] sd 1:0:0:0: [sdd] CDB: 
[154502.742022] Read(10): 28 00 2e 93 90 a8 00 00 08 00
[154502.742027] end_request: I/O error, dev sdd, sector 781422760
[154502.742030] Buffer I/O error on device sdd, logical block 97677845
[154502.742061] ata1: EH complete
[154502.742116] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154502.760160] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154502.760162] ata1.00: PCI err cause 0x40000100
[154502.760167] ata1.00: failed command: READ DMA EXT
[154502.760171] ata1.00: cmd 25/00:08:a8:90:93/00:00:2e:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154502.760172] ata1.00: status: { DRDY }
[154502.760177] ata1: hard resetting link
[154503.215828] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154503.246836] ata1.00: configured for UDMA/133
[154503.246858] ata1: EH complete
[154503.246895] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154503.264940] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154503.264944] ata1.00: PCI err cause 0x40000100
[154503.264947] ata1.00: failed command: READ DMA EXT
[154503.264951] ata1.00: cmd 25/00:08:a8:90:93/00:00:2e:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154503.264953] ata1.00: status: { DRDY }
[154503.264957] ata1: hard resetting link
[154503.720679] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154503.770682] ata1.00: configured for UDMA/133
[154503.770705] ata1: EH complete
[154503.770741] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154503.788788] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154503.788793] ata1.00: PCI err cause 0x40000100
[154503.788796] ata1.00: failed command: READ DMA EXT
[154503.788799] ata1.00: cmd 25/00:08:a8:90:93/00:00:2e:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154503.788801] ata1.00: status: { DRDY }
[154503.788806] ata1: hard resetting link
[154504.244525] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154504.275543] ata1.00: configured for UDMA/133
[154504.275567] ata1: EH complete
[154504.275601] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154504.293595] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154504.293596] ata1.00: PCI err cause 0x40000100
[154504.293599] ata1.00: failed command: READ DMA EXT
[154504.293603] ata1.00: cmd 25/00:08:a8:90:93/00:00:2e:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154504.293604] ata1.00: status: { DRDY }
[154504.293608] ata1: hard resetting link
[154504.749370] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154504.781387] ata1.00: configured for UDMA/133
[154504.781408] ata1: EH complete
[154504.781446] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154504.799480] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154504.799482] ata1.00: PCI err cause 0x40000100
[154504.799485] ata1.00: failed command: READ DMA EXT
[154504.799491] ata1.00: cmd 25/00:08:a8:90:93/00:00:2e:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154504.799495] ata1.00: status: { DRDY }
[154504.799502] ata1: hard resetting link
[154505.257227] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154505.288243] ata1.00: configured for UDMA/133
[154505.288265] ata1: EH complete
[154505.288297] sata_mv 0000:06:04.0: PCI ERROR; PCI IRQ cause=0x40000100
[154505.306295] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x6 frozen
[154505.306304] ata1.00: PCI err cause 0x40000100
[154505.306308] ata1.00: failed command: READ DMA EXT
[154505.306312] ata1.00: cmd 25/00:08:a8:90:93/00:00:2e:00:00/e0 tag 0 dma 4096 in
         res 50/00:ff:ff:ff:ff/00:ff:ff:ff:ff/ff Emask 0x20 (host bus error)
[154505.306313] ata1.00: status: { DRDY }
[154505.306318] ata1: hard resetting link
[154505.762083] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[154505.793097] ata1.00: configured for UDMA/133
[154505.793114] sd 1:0:0:0: [sdd]  
[154505.793116] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE
[154505.793117] sd 1:0:0:0: [sdd]  
[154505.793119] Sense Key : Aborted Command [current] [descriptor]
[154505.793121] Descriptor sense data with sense descriptors (in hex):
[154505.793122]         72 0b 00 00 00 00 00 0c 00 0a 80 00 00 00 ff ff 
[154505.793127]         ff ff ff ff 
[154505.793129] sd 1:0:0:0: [sdd]  
[154505.793131] Add. Sense: No additional sense information
[154505.793132] sd 1:0:0:0: [sdd] CDB: 
[154505.793133] Read(10): 28 00 2e 93 90 a8 00 00 08 00
[154505.793138] end_request: I/O error, dev sdd, sector 781422760
[154505.793141] Buffer I/O error on device sdd, logical block 97677845
[154505.793164] ata1: EH complete